MagLev Millennium Falcon

MagLev Millennium Falcon – Defy Gravity with Iconic Style

Bring the magic of the galaxy to your desk with the MagLev Millennium Falcon! Using the Magnetic Levitation DIY Kit from Maker Supplies, this model combines engineering and Star Wars nostalgia to create a breathtaking display piece. The Falcon floats effortlessly above its base, appearing to defy gravity, with an illuminated blue engine glow for an extra touch of authenticity.

Features:

• Magnetic Levitation: Levitates with precision using the MagLev DIY Kit.
• Iconic Design: The detailed Millennium Falcon model brings a beloved starship to life.
• Easy Assembly: No complex programming or electronics – just simple magnetic magic.
• Blue Engine Glow: Adds a stunning visual effect that enhances the display.
• Perfect for Display: A conversation-starting piece for your desk, shelf, or workspace.

Whether you're a Star Wars fan or a tech enthusiast, the MagLev Millennium Falcon is the ultimate blend of sci-fi fantasy and DIY innovation. 🚀

Update 30.12.2024: Added MagLev Position Helper
                                    Added Assembly Guide for Base
 

Boost Me

Assembly Guide:
Step 1: Attach the Thruster Piece to the Main Body

1. Align the Thruster Piece:
   • Position the thruster piece (with the blue section) at the rear of the main body, ensuring the edges line up correctly.
2. Fit the Tabs:
   • Insert the tabs on the thruster piece into the corresponding slots on the main body.
3. Press Firmly:
   • Press the thruster piece firmly until it snaps into place and is securely attached.

• Step 2: Attach the Bottom Main Body and Insert the Floating Plug

• Attach the Bottom Main Body:
  • Align the three pins on the bottom main body with the corresponding holes in the middle main body.
  • Press the bottom piece firmly until the pins snap securely into place.
• Insert the Floating Plug:
  • Place the floating plug into the center opening.
• Ensure the orange LEDs are facing the front of the model, as shown in the image.

• Step 3: Attach the Upper Main Body and Install the Cannon

• Attach the Upper Main Body:
  • Align the upper main body with the three pins on the lower assembly.
  • Press firmly until the pins snap securely into place, ensuring a snug fit.
• Install the Cannon:
  • Position the cannon on top of the circular mounting point.
  • Press it into place as shown in the image, making sure it is correctly aligned and securely attached.

Step 4: Attach the Cockpit

1. Assemble the Cockpit:
   • Insert the pin between the upper and lower cockpit sections to connect them securely.
2. Insert the Front Pin:
   • Place the front pin into the slot at the front of the main body where the cockpit will attach.
3. Attach the Cockpit:
   • Align the assembled cockpit with the pins on the main body.
   • Press the cockpit firmly into place until it clicks securely.

Step 5: Attach the Side Panels

1. Align the Side Panels:
   • Take one side panel and align the pins on the side panel with the slots on the main body as shown in the image.
2. Insert the Pins:
   • Carefully insert the pins into the slots until the panel is securely in place.
3. Repeat for the Other Side:
   • Attach the second side panel in the same way, ensuring both sides are aligned and snapped in securely.

Step 6: Attach the Radar Dish

1. Align the Radar Dish Assembly:
   • Position the radar dish and its mount above the designated slot on the main body, as shown in the image.
2. Insert and Secure:
   • Insert the radar dish mount into the slot.
   • Press firmly until it clicks securely into place.
     

Step 7: Assemble the Base

1. Remove the Original Printed Cover
   • Take off the original cover from the base of the magnetic levitation unit.
2. Insert the MagLev Base
   • Place the MagLev base into the new 3D-printed round base. Ensure the levitation mechanism is centered.
3. Align the Pins
   • Align the pins from the printed base with the holes in the MagLev base.
4. Secure the Power Socket
   • Position the power socket within its slot on the new base.
   • Use the provided nut to securely fasten the socket in place.
5. Glue the Light Sensor
   • Add a small amount of glue to fix the light sensor in its designated position. Avoid using excess glue to ensure the sensor remains functional.
6. Close the Lid
   • Attach the lid to the base and press down gently until it clicks into place. Ensure the alignment is correct for a snug fit.
      

Your Millennium Falcon is now complete, fully assembled, and ready for display!

Congratulations on completing your build! 🚀✨