Grumpy Christmas Gingerbreadbear

This design is for personal use only to find more designs or if you would like to sell the print please visit HERE  to find subscription options on Patreon, Thangs, or MMF. Don’t forget to follow on all of my socials for updates. 

Grumpy Bear is not in the mood for festivities and is unimpressed that he's been decorated for the holiday. He will hold a grudge and judge you throughout the festive season and look cute doing so.

Make sure you have 5 filaments active for the 3mf files to pull the colors correctly. There are two options saved in the 3mf a 4 color and a 5 color.

Painted 3mf included. Verify settings; what works for me may not necessarily be the correct setting for your printer.

Printing recommendations: 

• .20 layer height
• Print in place, no support required
• 3 walls - 10 -15% infill
• Allow the plate to cool before removing the prints

Filaments: 

• eSUN PLA+ - Cold White
• eSUN PLA+ - Brown Bambu Matte PLA - Scarlette (Red)
• Bambu Matte PLA - Grass Green
• Protopasta - Heartthrob Metallic Red

Important Please Read:

All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give a follow to keep up to date.

Warning: 

NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.