HERO S02/Hero螺旋桨S02手摇磨豆机收纳盒

为我助力感谢支持

hero s02手摇咖啡磨豆机收纳盒。

所需配件

磁铁：圆柱体5*5mm的6个

回形针：2个

注意事项

1、安装磁铁时注意磁性方向，否则放进去后可能不好拿出来。

2、如果购买的磁铁尺寸有稍微偏差可以用点胶水。一般购买的磁铁直径都是够5mm的，但是高度有的可能不够5mm。在安装的守候小心一点，如果用力太大磁铁可能会被压的太下和盒子平面不齐，影响美观。

3、铰链连接处用掰直的回形针即可

4、铰链的孔洞在打印完成后里面可能会有一些渣渣，可用回形针通一通。

------------------------------------------------------------------------------------------------------------------------

hero s02 hand-cranked coffee grinder storage box.

Required accessories

Magnets: 6 cylindrical 5*5mm

Paper clips: 2

Precautions

1. Pay attention to the magnetic direction when installing the magnet, otherwise it may be difficult to take it out after putting it in.

2. If the size of the purchased magnet is slightly deviated, you can use some glue. Generally, the diameter of the purchased magnet is enough for 5mm, but the height may not be 5mm. Be careful when installing it. If you use too much force, the magnet may be pressed too low and uneven with the box surface, affecting the appearance.

3. Use a straightened paper clip at the hinge connection

4. There may be some residue in the hinge hole after printing, which can be cleared with a paper clip.