Philips Hue Tap Dial Integration - Busch & Jaeger

{Print profile} V2 now available. Set in the magnets from the back side.

(second plate for Gira 55 standard framework)

Snap On/In to install a Philips Hue Tap Dial switch inside original Busch & Jaeger Balance SI. ((and Gira55))

•  The Gira 555 version have been modified as suggested in comments.

   

Print like in the .3mf file or as example in the last photo/screenshot of the slicer for the best result. 
(With the tree support and within an angle of around 45 degree).

You'll need 6mmx3mm magnets to put in the 4 holes. This will keep the Dial switch in place.

Hardware: