A tourbillon mechanism similar to what mechanical watches use.
Tighten the main spring and lightly push the roller, gears should start ticking.
Tips for assembling:
- Cut 3 pieces of filament for axles, as shown in picture, straighten them as much as possible.
- Gluing is required at one step shown in picture, recommend using 502 or crazy glue.
- In the last step, the main spring should be pushed into the hex shaft until surface is flat.
Remix of smbov's Flying Tourbillon 1.5
List of changes:
- Adjust axle hole size on the base for better stability.
- Adjust holes on gears and small springs to better fit filament axles.
SinkOrFloat
