P1P Arc enclosure poop chute 2 sizes

Boost MeIf you like my work, a boost is apreciated :) It cost you nothing and helps me continue my work :)

Update 22.12.24: Bigger box added

If you print a lot of multicolor, the small chute is maxed out quite quickly. I recommend to print the bigger box for those cases.

 

 

 

There are many poop chutes for the P1P/S X1. Bot none of them was fitting the P1P with the “Arc enclosure” perfectly.

So i designed my own from scratch, inspired by those many ideas out there.

 

This one also fits if you have narrow space behind the printer like me. It is only 52mm in width behind the printer backwall.

 

Poop chute is detachable for easy cleaning.

 

If you want, you can use 10x2mm magnets (maximum size, smaller is also possible). The chute needs 3 magnets and the detachable bucket 2.

If you still use the genuine P1P backwall which is made out of metal, you are all set.

 

If you printed your own backwall to fit a chamber fan, just glue 3 magnets from the inside to the printed wall.

 

 

You dont need AMS for multicolor print. Just some glue at the end for the Bambu logo and the inlay.