Plastic Gear Rex (Metal Gear Rex Inspired Model)

Exclusive Models and commercial licenses available on my Patreon. Special license for this one

 

Metal Gear Solid kickstarted my absolute love for Japanese Mechas, and Plastic Gear REX wants to be a homage to the classic videogame by Hideo Kojima.
While I tried to maintain most of the functionality, I adapted some joints to the reduced size. It's still fully articulated, and inspired by the various Metal Gear REX models commercially available.

SIZE: about 8-10cm tall.

Tolerances of this model are pretty tight, so it will require a certain degree of force to push the pieces together. Make sure to always push on strong parts and not thin ones (but that’s obvious :P ). Also, protect your thumb with a glove or it will hurt like mine, after hours of prototyping.

 

If PLA is still too hard and brittle for you, don't hesitate to use PETG! I actually encourage you to try PETG for the joints at least. I did not include a PETG profile because I don't have any to test with, at the moment (might come in the future)

 

SUPPORTS: While I strived to make the model without, I had to use them here and there to be a little more faithful to the original Metal Gear Rex. Most of them snap right off, but you might require pliers for the toughest ones, like the upper leg/ball joint insert part.

Might need:

• Pliers
• Hobby knife (for the supports leftovers, if any)
• Patience (Really, don't rush it, some pieces are small and fragile)
  
   

If you want to support the creation of more models like this, feel free to donate here: https://ko-fi.com/nemolabs

Also checkout my other Mecha: https://makerworld.com/en/models/936030#profileId-900905

 

Boost MeBoost me to help make more of these!