Facehugger Mask - wearable on top of N95

This mask sits on top of an N95, so your love of costumes doesn't conflict with your love of not getting sick after parties.

Specifically, it's sized to fit a Large size 3D N95 Mask from AOK Tooling with the silicone face seal (this mask has a rounded shape that stands away from the face). You may need to modify the nose bridge cutout to suit the mask and head size you're working with. When resizing to fit your head, remember to resize all the parts the same amount.

Parts list:
(1) Body
(1) Tail
(6) Leg - long joint
(6) Leg - medium joint
(6) Leg - short joint

Wearing the mask:
- It was reasonably comfortable just sitting on top of the N95 mask, but you could add foam or fabric to pad it.
- Glued a dark mesh fabric on the inside of the body to disguise the N95 mask. This worked great, just make sure it's a very breathable fabric.
- Tied ribbon loops around the flap hinges and two leg/body joints and then tied elastic to the ribbon loops to make two headbands.
- Mask in the photos is printed with basic PLA and painted with craft acrylic, with a gloss varnish added to "gooey" areas.

REMIX:

Modified from "Wearable Alien Facehugger Mask" by Purple Lion Prints on Printables, using the long tail option.
https://www.printables.com/model/488797-wearable-alien-facehugger-mask/

Changes from the Purple Lion Prints files:
- The body has been hollowed out and made taller, to provide more mask and breathing room.
- Added holes and cutouts to make breathing easier
- General re-sizing (110%)
- Removed one pair of legs to allow good sight lines

The same STL files are also available from me on Thingiverse (same model name).