Photo Frame (4 x 6 in)

I am removing this model from MakerWorld because of Bambu Lab's anti-consumer business practices. It can now be found on Printables. https://www.printables.com/model/1167710-photo-frame-4-x-6-in The same print profile will be uploaded there so you should be able to download it and open it in Bambu Studio or Orca Slicer with no issues. I apologise for any inconveniences this may cause. 

 

I wasn't planning on making this but I needed some reasonably quick and simple Christmas gifts for family.

 

This is a simple but bold, modern photo frame that fits a 4 x 6 in / 10 x 15 cm photo. The back plate is attached using 8x 8 x 3 mm magnets which you insert into the model while it's printing. The frame can be used in either landscape or portrait orientation on a desk , or hung on a wall using a screw.

 

I used Polymaker's Polyterra Graphite and Marble White filament for the frames in the photo.

 

Please note that I used cheap magnets that may not be exactly 8 x 3 mm so if you have problems with the magnets fitting then that could be why. Let me know and I should be able to help. Also make sure the magnets are oriented correctly or the plate won't stay on properly.

Boost MeIf you have any spare boosts and like my work than please boost this model. I'd really appreciate it thanks!
-SC3DPrints