RotoPax Mount (full size)

RotoPax mount for their gas and fluid cans. Two models. One is designed to be attached to a surface using two #8 wood screws. The other uses two 5/16" bolts. These larger holes also work with #12 wood screws. Both use a 2" long 5/16" bolt in the handle with a captured nut. Print in PETG or ASA/ABS, as PLA will sag over time and droop in the heat. I used a generic PETG I had lying around and used the default 0.2 mm Strength setting but upped the infill to 35%. The handle is compatible with the factory mount.