Harley Quinn

Here is the final print for my DC Comics Week of posts, and it's another femme fatale – Harley Quinn.

My partner in crime (and life) Canadian Gamer was inspired by my DC Comics week to create a femme fatale print of his own to release together with me. Two tricky little vixens set loose on Makerworld tonight! Check out Canadian Gamer's Poison Ivy here.

----------------------------

My designs are for personal printing use only.

A commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

Patreon members also have access to exclusive designs available only on Patreon.

Those interested in Canadian Gamer's designs can check out his Patreon here to find his exclusives!

----------------------------

Project: Harley Quinn
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

This print uses 5 unique filaments
PLA BambuLab Matte Dark Blue 
PLA BambuLab Matte Scarlet Red 
PLA BambuLab Matte Ivory White 
PLA BambuLab Basic Turquoise Blue 
PLA BambuLab Matte Lemon Yellow

Swap Instructions:
Start with Dark Blue
At 0.8mm swap to Scarlet Red
At 1.36mm swap to Ivory White
At 1.68mm swap to Turquoise Blue
At 1.76mm swap to Lemon Yellow
At 2.08mm swap to Ivory White for the rest.