Burn Kettlebell Magnet

A 2 inch tall Kettlebell magnet.

The logo on front is for the Burn Boot Camp gyms.

Magnet hole on back is designed for 6mm x 3mm magnets.

I created this for a little competition at our local Burn.

Printed on an X1 Carbon

0.4 nozzle

0.2 layer height

6 walls

25% infill

no supports needed when printing just one.

     If printing multiple at same time, I suggest using supports just to help with bed adhesion.

     Also add a brim if printing a bunch at once.

I blocked the seam from showing on the front of the model.

All seams should be on the backside.

Printing a single model with dual colors using the AMS is quite the time suck. and filament poop party.

One single kettlebell is clocking in at a bit over 4 hours.

16 on one plate took about 16 hours. 

     I grouped these ones in groups of 8 and had it print per object. so 8 at a time on one plate.

A single kettlebell with only one color is a 38 minute printing time

DISCLAIMER:

This is not in any way associated with the Burn Boot Camp company.

It is an unofficial creation by me.