SPD Red Ranger Helmet

SPD Red Ranger Helmet

Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268

Uses 8x2mm Magnets, 22 in total. - Be sure to use the magnets in the BOM as they were tested and work properly.

Helmet Main has painted supports as the prime tower is 100% needed for a clean print and can not fit without the custom supports. 

The lens I included can be used as a templet for the Face Shield or for display.

For cosplaying Lens I recommend  - https://www.amazon.com/gp/product/B0D2NHXCLV/ref=ox_sc_act_title_2?smid=A1U6SLB6T92CWN&th=1

Most people seem to buy this one - https://www.amazon.com/gp/product/B002VECKRO/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1

Once mine come in I will let you know how they perform.

The side lights were made to replicative the original Power Rangers helmet car light look. 

This took some time to replicate correctly. 

Using Red Transparent Filament and the settings I provide in the Print Profile you to can replicate the same look. 

https://www.amazon.com/HATCHBOX-3D-Filament-Dimensional-Transparent/dp/B00M0CS68E/ref=asc_df_B00M0CS68E?mcid=2663a0b0f32c35dab12c65842115fa5a&tag=hyprod-20&linkCode=df0&hvadid=693071814430&hvpos=&hvnetw=g&hvrand=3507893205957135145&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003342&hvtargid=pla-638204569625&psc=1

I personally think this detail sets my model above and beyond the others.  

Pictures can be found in the Print Profile. 

I used clear transparent filament as It was needed for testing purposes. You will want to use a red or dark red.

Enjoy