HueForge - Lord Shiva

My first Hueforge, it is for Lord Shiva - the supreme power. Lord Shiva is a prominent Hindu god and a member of the Hindu triumvirate, along with Brahma and Vishnu.  

For the people who are not aware: https://en.wikipedia.org/wiki/Shiva

Hueforge instructions for your reference:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.54x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #13 (1.12mm) swap to Orange
    At layer #22 (1.84mm) swap to Yellow for the rest.