Sailor Moon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Kexcelled Blue Transmission Distance: 3
    PLA PolyLite Magenta Transmission Distance: 1
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 6 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #9 (0.8mm) swap to Magenta
    At layer #10 (0.88mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Jade White
    At layer #20 (1.68mm) swap to Yellow for the rest.
 

Boost MeÜber ein Boost freue ich mich natürlich. Es motiviert Creator ihre Modelle zu veröffentlichen.
Danke.