Naruto Uzumaki HueForge

My first HueForge and very first upload to MakerWorld! I purchased HueForge as soon as I saw some of the models created using this amazing program. A family friend likes Naruto, and I came across this wallpaper (Naruto Uzumaki Intense Look Wallpaper) which seemed like the perfect starting point. Totally messed up the first print (all black since I didn't read all of the directions, LOL). Second attempt worked perfectly. Anyway, I sized it to fit into this Frame Hueforge 150x210 Horizontal mode so that's the next print for today. I'm not too sure on the TDs for a couple of the filaments in my library.

HueForge Describe

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 210x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA+ Creality Red Transmission Distance: 3.6
    PLA Solutech Orange Transmission Distance: 6
    PLA+ Esun White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #12 (1.04mm) swap to Orange
    At layer #16 (1.36mm) swap to White for the rest.