Pikachu - Hueforge - 200x200 - Pokemon

Who doesnt love Pikachu? One of the iconic Pokemon out there. Here are my settings below:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
    PLA Generic Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA Generic White Transmission Distance: 6

This print uses 4 unique filamentså

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Red
    At layer #19 (1.6mm) swap to Yellow
    At layer #30 (2.48mm) swap to White for the rest.