SLAB - Metric Redesign

SLAB - Silly’s Lever Action Blaster - Talon Mag-Fed, Half-Dart Springer

Earlier this year, I downloaded the original imperial version of the SLAB - Silly’s Lever Action Blaster and began modifying it to suit my needs. By the time I finished, a metric version had already been released. However, my version is a bit different:

• It requires less specific hardware.
• The hardware I use is easy to obtain in my region.

Suggested Settings:

• Layer height: 0.16mm, as some objects had visible layers with 0.2mm.
• Wall loops: I used 3 wall loops for most parts.
• Infill: Gyroid infill at 15% for most components.
• For the following parts, I used 5 wall loops with 100% rectilinear infill:
  TriggerBlock, RodCap, RodCapPivot, RodCapKeeper, Ram_FlatFace, PlungerHead, PlungerRod, PrimeTransferBar, Catch, CatchPusher.

For the required hardware, see my assembly video: