Mandalorian - Hueforge

This is 5 colour Hueforge of Mandalorian abstract painting.

 

I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.
And profiles for both sizes with pause during 2nd colour (Blue) for changing the other spool.

Guide for printing more than 4 colours with single AMS down below instructions.

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

 

If you want stand for this print check out my Simple vertical stand.

 

If you like this picture, you can look at my other Star Wars pictures here in this collection:

https://makerworld.com/en/collections/3849110

 

 

Boost MeI print all of my creations myself.
If you like my work, pls send me a boost, it will help me make more.
Feel free to PM me if you have some idea for a nice picture.
Thank you.

 

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Cyan Transmission Distance: 4
    PLA BambuLab Basic Red Transmission Distance: 3
    PLA BambuLab Basic Sunflower Yellow Transmission Distance: 3.2
    PLA BambuLab Basic Jade White Transmission Distance: 4.8
This print uses 5 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Cyan
    At layer #9 (0.8mm) swap to Red
    At layer #13 (1.12mm) swap to Sunflower Yellow
    At layer #17 (1.44mm) swap to Jade White for the rest.

How to print more than 4 colours with single AMS/AMS Lite

You can add pause in slicer, or pause manually during print, or you can download/print my profile with pause.
In my print profile pause is set during printing the 2nd colour (Blue).
When starting the print you can assign all of the colours to your 4 slots. Start with AMS filled with first four colours and then assign the last colour to slot using the first colour in the print, in this case black.

WRITE DOWN WHAT SLOTS DID YOU ASIGN FOR WHAT COLORS so you don't mess up.

For this print my assignment of colours looked like this:

 

When the pause happens you simply change the spool for the last colour and press continue.

 

For this print I started with loaded colours in AMS this way:
Slot 1: Yellow
Slot 2: Black
Slot 3: Red
Slot 4: Blue

 

When the pause happens during 2nd colour (Blue), change the spools this way:
Slot 2 - change form Black to White
This is just example for this print, but this is the way to print more than four colours using single AMS.