坦克爆炸反应装甲/爆反装甲-磁吸分体式冰箱贴

适合作为冰箱贴使用

原模型为一体式打印，消耗的材料较多。

我将模型拆分、缩小、抽壳，并增加了磁吸开盖结构，可内嵌8颗3(OD)*2(HT)mm的磁铁

修改后仅消耗16.7g材料，配图使用的点维哑光petg军绿色。

若不需要磁吸开盖，可在切片软件中将底盘等比例放大至100.5%，即可靠定位销的摩擦力稳定连接上下盖

已在切片文件中设置好了暂停，需在暂停时将磁铁嵌入，注意区分N、S极！！！

ENG:

Act as a fun refrigerator magnet.

The original model was designed for one-piece printing, which consumes a significant amount of filament.

I have modified the model by splitting, downsizing, and hollowing it, and added a Magnetic Snap-On Lid feature. You're gonna embed 8 magnets (3mm OD × 2mm HT)

If the magnetic snap-on lid is not required, you can scale the base to 100.5% in your slicing software. This will ensure a stable connection between the top and bottom covers via the friction of the positioning pins.

Two pauses have been set in the slicing file at the point where the magnets should be inserted. Make sure to act fast otherwise the material will shrink and deform. Be sure to distinguish between the North (N) and South (S) poles!

The model consumes only 16.7g of filament, and the example image uses DoWell matte military green PETG filament.