Cute Knitted Elephant

Hi guys, enjoy my knitted Elephant model available as multi-color print on separate plates. The eyes are printed separately and then can just be glued on. This uses quite less filament. As always feel free to add additional print profiles if you have nice ideas. 

As some people were facing problems with the trunk breaking off, I embedded the trunk now quite much in the support which should solve the issue. Be careful when changing the print settings and e.g. making the support thinner around the trunk!

Prepared print profiles include height of 75mm.
 

If you are interested in selling prints of my models, check out my Patreon: https://www.patreon.com/c/treedprints

Check out my fridge magnet version of this model here: https://makerworld.com/en/models/935400#profileId-900157

Also check out my other models here: https://makerworld.com/en/@TreeDprints/upload

This is a high-quality decorative 3D model created for visual display and aesthetic appreciation. The design focuses on clean geometry, balanced proportions, and surface quality, resulting in a print that looks refined from all viewing angles.

The model is intended for decorative and artistic use rather than functional or mechanical applications.

Design & Print Readiness

The geometry has been carefully prepared for 3D printing, using solid, manifold construction to ensure reliable slicing and consistent print results. The model is suitable for common additive manufacturing methods and can be printed on a wide range of consumer and professional printers.

Details are designed to print cleanly while maintaining visual clarity, making the model adaptable to different resolutions, materials, and printer capabilities.

Files & Orientation

The provided files include print-ready orientations selected to balance surface quality, support usage, and ease of post-processing.

For best results:

• Use the supplied orientations as provided
• Reorientation is not recommended unless you are familiar with its impact on surface finish and support placement

Supports & Post-Processing

• Supports may be required depending on orientation and printer type
• Use light or tree-style supports where possible to reduce surface marking
• Allow the print to fully cool before removing supports
• Remove supports carefully using flush cutters or precision tools
• Light sanding (grit 200–400) on support contact areas can improve the final appearance