Aang and Appa - Avatar The Last Airbender

Aang and Appa soar through the clouds in this print inspired by Avatar: The Last Airbender

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

Patreon members also have access to exclusive designs available only on Patreon.

----------------------------

Pictured frame, stand or puzzle bottom can be found in Frames and Functional items over @CanadianGamer https://makerworld.com/@CanadianGamer/collections/1027330

Project: Aang and Appa Airbender
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

This print uses 7 unique filaments
PLA BambuLab Basic Black
PLA BambuLab Basic Blue 
PLA BambuLab Matte Ice Blue 
PLA BambuLab Matte Scarlet Red 
PLA BambuLab Basic Sunflower Yellow
PLA BambuLab Basic Beige 
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At 0.8mm swap to Blue
At 0.88mm swap to Ice Blue
At 1.12mm swap to Scarlet Red
At 1.36mm swap to Sunflower Yellow
At 1.84mm swap to Beige
At 1.92mm swap to Ivory White for the rest.