Dino Thunder White Ranger Helmet

Dino Thunder White Ranger Helmet

Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268

Uses 8x2mm Magnets, 22 in total. - Be sure to use the magnets in the BOM as they were tested and work properly.

Use Super Glue "I use the gel kind" when assembling the Top Wing parts and inserting the magnets into the Helm and Back.

I used Hot Glue for the Lens as I have plans on changing it soon. You can super glue them in as well if you don't have plans on removing them.

Lens For Display - can be used as a templet for the Face Shield or for display.

Also included a Printable Lens that can be seen through.

For cosplaying Lens I recommend  - https://www.amazon.com/gp/product/B0D2NHXCLV/ref=ox_sc_act_title_2?smid=A1U6SLB6T92CWN&th=1

Most people seem to buy this one - https://www.amazon.com/gp/product/B002VECKRO/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1

Once mine come in I will let you know how they perform.

Enjoy