Hueforge - Cow Calf Snow

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.5mm and the Actual Depth is 1.6mm

Filaments Used:

    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Matte Ivory White Transmission Distance: 4

This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Ivory White for the rest.