Ichigo Kurosaki Katana (BLEACH)

Boost MeGracias por su apoyoMembershipMembresía comercial Comercializa libremente con los diseños físicos publicados en; https://makerworld.com/en/@YAKUZA3D

Foldable katana from - Ichigo Kurosaki - (BLEACH)

I tested it in PLA+

0.4 Hotend, 0.2mm layer, 2 walls, 15% infill

If you have trouble printing the blades, you can put an inner and outer raft to remove later.

Recommendations:
1. Close the blade from bottom to top holding the lower pommel and not the handle, this will help durability.
2. Be careful with the tip.
3. Do not open with excessive force, it is not necessary

For painting I recommend acrylic paints and then a layer of resin over the painted part so that it can withstand friction.

VIDEO OF THE ASSEMBLY
https://www.tiktok.com/@makers.m3d
https://www.tiktok.com/@makers.m3d/video/7319250267549994246?_t=8mmUAXEjqcg&_r=1

PROFILE
https://cults3d.com/es/usuarios/Makersm3D

NETWORKS
https://linkfly.to/Makersm3D