Multiboard Build Plate Holder

Multiboard Build Plate Holder

 

This is a holder for Bambu Lab build plates which attaches to the Multiboard system (https://www.multiboard.io/). It will hold up to SIX build plates securely.

 

The basic style was inspired by several other designs, but the model is completely original.

 

This build plate holder was designed to have a fairly low profile, and stands out only about 33mm from the surface of the Multiboard panels. The build plate slots are 1.5mm wide, which should accommodate most any build plate.

 

The build plate holder connects to a Multiboard system via the 'medium' sized threads (see links below). The 3MF file includes both a left-hand and a right-hand version so you can use whichever works best in your space.

 

I have pictured the left-handed version mounted to Multiboard panels on my X1C.

 

Two Multiboard snap connectors:

• https://than.gs/m/974295 - Multiboard Snap

And two of whichever of these best fits your Multiboard mount setup:

• https://than.gs/m/974085 - 10 mm Mid Thread, Flat Head, T-Bolt
• https://than.gs/m/974001 - 18 mm Mid Thread, Flat Head, T-Bolt
• https://than.gs/m/974174 - 20 mm Mid Thread, Flat Head, T-Bolt

 

Enjoy!

 

Boost MeA Boost would make me inexplicably happy!