Spiderman Hueforge - Exclu

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Nozzle: 0.4

The Model is 220x220mm in size
 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #13 (1.12mm) swap to Red
    At layer #17 (1.44mm) swap to Yellow
    At layer #21 (1.76mm) swap to Blue Gray
    At layer #23 (1.92mm) swap to Jade White for the rest.