Gridfinity Bin - 6 inch caliper holder (minimal)

This is a compact set of Gridfinity bins designed to hold your calipers without eating up too much space. It’s a 1x2x6u pair of bins with an open center, leaving room for a 2x4x4u bin to fit snugly in between (check out my pics - I’ve used the middle bin for my hole tolerance gauges).

 

The profile features a built-in pause for a color swap so you can give the rim a cool accent. If you’ve got an AMS, you might want to change the pause for a color swap in your slicer. Or, if you’re not into color accents, just skip the pause for a clean, single-color print.

 

Heads-up: These are sized for generic 6-inch calipers (mine are off-brand), but double-check the pics to make sure your calipers are similar before printing. The minimalist design should accommodate slight differences in length or thumbwheel placement, but I’ve only tested with my own.

 

 

 

Boost MeIf you found this useful and have a boost to spare, I'd appreciate it 👍