Working Airsoft Sound Grenade (New Updated Body!)

CHECK THE STL TAB FOR THE ROUND/YELLOW BODY NOT THE PRINT PROFILE

This Airsoft Grenade Uses Cap gun rings to make a loud sound on impact

You will need a cut down aeg spring, 35mm length seems to work the best. You also need a M5x50mm Bolt.

1. screw the sear all the way onto the bolt till it sits under the head. 
2. insert the bolt through the fuze from the top 
3. slide the spring over the bolt from underneath and lock it in place by screwing the striker
4. place your cap rings on the holder and put it cap ring side down inside the body of the grenade
5. you may have to adjust the tension of the striker but the sear should catch on the fuze when pressed up the ledge. 
6. screw fuze assembly onto the body+cap ring in the holder
7. a cobbler pin can be placed into the little hole on the fuze preventing premature detonation 
8. pull the pin and throw 

 S