Naruto Sage of Six Paths Multipart Hueforge

This is a Naruto Sage  of six paths measuring 460mm X 460mm. I have made it thick enough that it can be put on a wall with command strips or be used with my modular frame or frameless system. 

Original Art

https://makerworld.com/en/models/771799#profileId-707773

Modular Frame System

https://makerworld.com/en/models/826217#profileId-769879

Modular Frameless System

https://makerworld.com/en/models/861342#profileId-811667

Color Swaps

Start with Black (sunlu)

1.36mm swap to Blue Gray (overture)

1.44mm swap to Orange (elegoo)

2.16mm swap to Yellow (overture)

2.64mm swap to White (overture)

You don't need the same filament as me only similar colors. Id recommend a more gray/ darker option for your Blue Gray than what I used.

for 5 colors on 1 AMS start your print with the 5th color being the same as the first (black). Once the print bed starts moving pull out your slot 4 filament (yellow) but leave it in the AMS. This will cause the printer to stop when it gets to yellow since it doesn't see a filament in slot 4.  Put the yellow back into slot 4 and swap your Black in slot 1 for White and tell the print to resume.