Lotus flower fixture - LED Kit 001

Bambu Lab included LED kits in their Black Friday gifts. This fixture is a stylish way to make use of them!

 

Note: No AMS needed, since the base and flower are printed on separate plates

Boost MeIf you enjoy the model, please support me by leaving a boost and showing off your print in the ratings!

 

The design is based on the Lotus Temple (Baháʼí house of worship) in New Delhi.

 

Print settings flower:

I recommend printing the lotus flower itself using a 0.2mm nozzle (if you have one), because the thin overhangs at the top will be sharper, and the layer lines less obvious. I have also tested with 0.4mm, which also worked fine.

• Support 30° (The highest arches shouldn't need any support, just lower arches)
• 4 walls (prevents infill in shine-through regions)

Print settings base:

The default 0.4mm nozzle should work fine for the base.

• Top & bottom surface patterns: Archimedian
• Sparse infill: gyroid
• No infill needed

Assembly

I recommend gluing the flower onto the base connector. That way, it stays secure and you are still able to remove the light using the thread.