Miniature Adventurer DnD Minifigure Roleplay - V1

30 days after receiving my first 3d printer I finally installed a 0.2mm nozzle and was blown away by the results. I now have over 8 minis printed and ready for me to paint (yay… another expensive hobby).

Here is my first mini in a series of upcoming DnD/Wargame characters I will be sharing. 

The settings for the supports have been finely tuned so try not to modify them too much for more guaranteed results. Take your time to remove the supports, carefully with a tweezers. It's always better to pull the supports down instead of twisting your pliers. Use a utility knife to shave away the last bits of support material and then use a blowtorch to quicklly burn off loose stringing.

I used custom settings to achieve the best quality possible with a 0.2mm nozzle and 0.06mm layer line. I have tried to optimize the model for painting. I will be painting my first minis soon and wil post the results.

I hope you enjoy this minis, folow me for more like this.