Doorcorner - Star Wars The Empire Strikes Back

Doorcorner Super Star Wars The Empire Strikes Back
 

Just a little funny idea that I had for a while. How do you like it?

If you get any printing issues, reduce the speed by 50%.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 250x196.2mm in size
You may print at higher layer heights below the Min Depth of 2mm
The Max Depth is 3.8mm and the Actual Depth is 3.8mm

Filaments Used:
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 11600
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Brown Transmission Distance: 2 10800
    PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 11400
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
    PLA BambuLab Basic Red Transmission Distance: 4 10200
This print uses 8 unique filaments

Swap Instructions:
    Start with Blue Gray
    At layer #25 (2.08mm) swap to Charcoal
    At layer #27 (2.24mm) swap to Marine Blue
    At layer #30 (2.48mm) swap to Gray
    At layer #32 (2.64mm) swap to Brown
    At layer #35 (2.88mm) swap to Lemon Yellow
    At layer #39 (3.2mm) swap to Ivory White
    At layer #41 (3.36mm) swap to Red for the rest.