TIC TAC GUN 2 Unbranded

Introducing the unbranded version of the amazing TIC TAC GUN 2 by dylcro2!

this remix removes the branding from the blaster for those who prefer to use unbranded items plus it makes the print a lot easier and simpler.

Required items: 3 x M3x16mm bolts, 1 x M3 x 20 bolt, 4 M3 hex nuts, standard pen spring

How to build:

• Install a standard pen spring on the little tab near the back of the gun.
• Place the 4mm spring barrel into the slot.
• Line up the trigger with the middle hole on the right side piece and make sure that it all moves smoothly.
• Place the 49g mag adapter into the top slot of the gun.
• Install the left side of the gun using 4 m3 x 20 bolts and 4 m3 hex nuts then screw it all together.

• Open your tic-tac's and remove the lid, slide the cartridge into the adapter at the top of the gun and now you are ready to fire away! 🔫

   

•  if the tic-tac's get jammed simply give it a shake.

An optional elastic band can be added for insane power!

Big thanks to dlycro2 for the original model.