Design Watch Stand - NO AMS NEEDED

DESIGN WATCH STAND - NO AMS NEEDED

*** UPDATE 09-01-2025  ADDED SINGLE COLOR VERSION ***

 

 

I would like to introduce you to my designer watch stand.

This quick-to-print design watch holder with a honeycomb pattern is the perfect display for your watch.
Whether narrow or wide - any clock up to 50 mm in diameter will find its place. A real eye-catcher for any sideboard or shelf.

 

They are easy and quick to print and you can never have enough of them :-)

 

There are notches on the underside so that you can insert rubber stoppers so that the stand does not accidentally slip out of place.

These should be 8mm x 3mm in size.

 

You don't need an AMS for this one. Just print all the parts, stick them together and you're done.

 

Please print these as on the printing plate so that you get a good result.

Don't forget to calibrate the printer and filament for optimum results

A layer height of less than 0.2mm is not recommended.

The filaments  I use are listed 

It works great for me.

 

Boost MeIF YOU LIKE IT - BOOST IT

If you like my work/project consider supporting me with these options:

• leave a like
• leave a comment
• download the file
• or buy me a Coffee
• check out my Patreon Page!

 

 

This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.

 

If you wish to sell the physical 3D prints of my designs commercially

 

• Obtain a Commercial Licence

 

Have fun printing

TBG