2025 Year of the Snake Bookmarks

Set of 3 Asian inspired snake bookmarks for 2025's year of the snake. 3 different print profiles for each bookmark. Pick the one you like and print just that one, or print all 3! Just add a tassel or string and you're all set! Also makes a great gift for anyone who likes those slithering reptiles, like me! (I love python's myself, especially the Green Tree Python and most albino python's!)

 

Boost MeIf you enjoy any of my prints, please consider a boost! Thank you!

 

For other fun and festive models, check out https://makerworld.com/en/@Hockey_Dad

 

 

Scale up or down on X/Y axis only. DO NOT adjust Z height!

 

If you get “floating regions” warning, that can safely be ignored and does not required supports.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used: (For red and yellow snake bookmark)
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Red
    At layer #10 (0.88mm) swap to Yellow
    At layer #15 (1.28mm) swap to Jade White for the rest.

 

Filaments Used: (For yellow snake bookmark)
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Yellow Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Yellow
    At layer #14 (1.2mm) swap to Jade White for the rest.

 

Filaments Used: (For green snake bookmark)
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic BambuLab Green Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to BambuLab Green
    At layer #14 (1.2mm) swap to Jade White for the rest.

 

Any questions or requests, please ask.

 

Please leave a review!