A1 Anti-vibration feet

These feet support the A1 both in the corners and under the original feet, so no need to butcher your beautiful machine and remove the original pads for a quieter print.

I redesigned theese basicly from what touches the printer and down, and to use those round rubber feet wich is available pretty much everywhere with an OUTER DIAMETER 29,2mm and INNER DIAMETER 12,5mm

Here´s a link so you know what i´m talking about 

https://www.amazon.com/Imdinnogo-Accessories-Bambulab-Anti-Slip-Cushioning/dp/B0CLV6K74X/ref=sr_1_3?crid=24H4CCOCKZGSL&dib=eyJ2IjoiMSJ9.G9WOTm7aSnH6zyvexA8mrrkgAO5vUdHCtTsYf0U0N-IdDB-454bq619Reu866sVzmDOUf1pHCQr-mTcPmTwc_6j03UL65WJan9MOk0vYZLEGLhYZCDsT7Q6a1D0vwdyFfWG7c3WHa0XxcfZ9TrPWPtb7LXs5fkAhHIipeJpoINISUIgHrXcCu820MTxfSDhK3LbHI9zOrGUGXEWo5JQDcgcxN-uofGmnAw6HT50C-P8.L-nnENzG9eRS4vhkAUK-l41EHNbkl5XWkRg-_dsiO7g&dib_tag=se&keywords=bambulab+a1+feet&qid=1736102965&sprefix=bambulab+a1+feet%2Caps%2C510&sr=8-3

I do recomend you mount theese with some strong double-sided tape, both under the corners and on the sides to keep them firmly in place.

The feet are not labled (RR,RL etc) so please do a dry-fit before committing with double-sided tape.

EDIT: 6/1 slight update on the position of the rubber feet in the front to achieve better weight distrubution between corners and original feet

Happy printing!