A page, a coffee, a perfect moment…
A bookmark design for coffee and reading lovers.
Print upside down.
Need a 0.2mm nozzle, don't use 0.4mm it will not turn great.
Important :
- 0.2mm nozzle is mandatory, i never been able to get a good looking print with 0.4mm nozzle
- Clean your build plate !!!
- Level your build plate at start up !!!
- This print can be challenging !!! Check your first layer !!!
- Keep the same color order as the writing will print first. If the writing is not the first color, it will be blurry !
- Check the writing first, if it's not perfect (have some curled filament), stop the print, clean your build plate with dish soap. Start over again.
- The writing must be perfect, otherwise, start again
PhantomX
