Bambi and Feline

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.16mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #4 (0.76mm) swap to Blue Gray
    At layer #6 (1.16mm) swap to Gray
    At layer #9 (1.76mm) swap to Jade White for the rest.
 

For blue-gray you can use a darker gray.