OneWheel Stand for XR and PintX

Hi All, 

My first upload :)
 

I designed this stand primarily for my XR, which has suspension and additional bumpers, making it thicker and significantly heavier than the PintX. It could also accommodate slightly larger boards than the PintX.

Instead of filling the debossed areas in the same print, I’ve added a second plate to the file that can be printed separately to save time and filament. The tolerance for the writing and logo is quite tight, so you’ll need to apply a bit of force when inserting it into the stand—gently tap it with a hammer if necessary.

While the writing and logo can be pressed all the way in, I left  them slightly raised for a more 3D effect, it also make it easier to remove the object in case you want to replace it with a different colour.

Funny enough, it can also work as a laptop stand, better for the laptops that open at 180.

I have designed this to be printed on the Bambulab x1c as it is 20cm deep, but if resized, can be printed with other printers, a smaller stand should also work for the XR and PintX and other boards.

Fire over any questions.

Thanks,

A