In the Style of Diagon Alley HueForge

In the Style of Diagon Alley

If you resize the model make sure you do not scale the Z axis or the print colors will not be in the same position

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x114.29mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Orange Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5
 

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Orange
    At layer #10 (0.88mm) swap to Yellow
    At layer #14 (1.2mm) swap to Jade White for the rest.