Moose adapter for 3dmakerpro Multi-Axis-Turntable

This is experimental design allow using the Moose scanner with the Multi-Axis-Turntable.

The position have been optimized for having excellent distance needed for the Moose scanner. The best position is the hole in the middle. For smaller or larger objects the position of the Moose scanner can be adjusted by using other holes on the adapter.

Important note:

This is my own experimental design which have been proven to work very good with Moose scanner. However, the use of the Moose scanner is not officially supported in the SW to be used with Multi-Axis-Turntable. In order to use it you need to have two PCs, one to control the Moose scanner and second one with Seal scanner to control the Multi-Axis-Turntable. 

Beside 3d printed parts following items needed:

1x photo screw (¼", UNC)

1x nut (¼", UNC)