iPhone MagSafe Mount (Ecosystem) - 3.Magnet+Metal

Hi All,

Third iteration of my iPhone mount ecosystem.

 

What is different about this. The Mount is divided into two parts. 

1. Universal MagSafe Mount Holder (you can take this anywhere). Just make one of these and you can use it on all individual mounts I have created. Please download the print profile - https://makerworld.com/en/models/922769#profileId-885211 (Note: This is also the link for the shower mount)
2. Mount 3: Stick Anywhere a Magnet can stick. Tested and works perfectly. Again - I also have been using it lately and enjoying it very much.   - I made more variations of this mount to use around in the house, for Tesla which I will post as different profiles and cross link them. For the Tesla one - check this —> https://makerworld.com/en/models/931057#profileId-895022

Boost Me

About the Universal MagSafe Mount:

I made two styles for this mount. I already had a peak design magnet mount for which I made the universal holder so I don’t need to buy more than one. The darn thing is expensive but a strong one. Then I thought not everyone would have to buy it. So I bought a round one from Amazon for ~$10 and made a holder for it. I have posted pictures for both and also provided the amazon links below. As mentioned above - two styles can be downloaded from this link - https://makerworld.com/en/models/922769#profileId-885211

 - All you need to do is print the holder in the print profile and just pop in the MagSafe (Peak Design mobile MagSafe or the round MagSafe) into it. Make sure you use the same orientation for better print quality. Also enable tree supports basic and ensure good bed adhesion. (Simple Tip: I wash my build plate every 2 weeks with dawn power wash and warm water so it maintains good bed adhesion).

 - you iPhone can be used with/without a case. 

 - works with iPhones 12, 13, 14, 15, 16

 

About the Mount3: Stick Anywhere a magnet can stick. 

This works perfectly for me in my home gym. Have been using it and been very useful. Print it in the same orientation as posted for better quality. I got the magnets from Amazon - https://www.amazon.com/gp/product/B07QX3HTKD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

Apply an anti-slip will to sure the mount doesn't slide/slip down (very much a necessary step when using magnets to mount heavy things) - Amazon link for Anti-slip - https://a.co/d/jgFjhj7

 

Disclaimer: Make sure your universal MagSafe magnet is good/powerful enough. I have a 14 Pro Max with a Peak design case (it is a bit on the heavy side). So if mine works, lighter/smaller phones with lighter MagSafe compatible cases will absolutely work. 

 

Note: I did not make this as a charging mount as that wouldn’t make sense. LOL. Also, this is not to mount your iPhones flat on a surface, but at a good viewing angle. you have those plenty.