Box+drawer for DeLonghi Nespresso coffee maker

Boost MeIf you like this model please boost me - it doesn't cost you anything! Thank you!

Note: This print is the version that fits the DeLonghi EN85 B coffee maker (and similar) with the ORIGINAL DRIP TRAY. I have also designed a version of this model for the larger drip tray I have designed.

 

For reference, these are my various Nespresso coffee maker related designs:

Enlarged drip tray-Delonghi Nespresso coffee maker: https://makerworld.com/en/models/205237

Box+drawer for DeLonghi Nespresso coffee maker (for original drip tray): https://makerworld.com/en/models/96542

Box+drawer for DeLonghi Nespresso coffee maker BIG (for enlarged drip tray): https://makerworld.com/en/models/507198

 

--------------------------------------

 

I am constantly looking at ways to save space in our very small apartment - this is a solution to save kitchen benchtop space by providing storage space for our Nespresso capsules right under our coffee maker. Our coffee maker is a DeLonghi EN85 B but many other Nespresso coffee makers have exactly the same footprint.

 

The print consists of 3 parts (all provided in Bambustudio format and as STL):

• Main part which is the box that accomodates the drawer. Unfortunately it is a bit too large for the 25x25x25 cubature of the Bambulab X1C - so it is split into 2 parts that can simply be connected after printing (you may want to add some super glue but it is not a must). You will need a 3D printer that has a 25x25x25 printing cubature as the larger part is ca. 24 cm long.
• The drawer that has space for ca. 19-20 Nespresso capsules
• The rear part which can store additional stuff (this is not a drawer). This part connects to the main part without any tools/glue

Note: Due to the large bottom surface this print tends to warp. I'm recommending to print this in PLA in order to avoid warping as much as possible.

 

Have fun!