Cat Manual Music Box

Made some of these for Christmas gifts this year. They are cute, small, and loud :)

Dimensions of box (not including handle) 63mmx63mmx32mm

--------------------------------------------------------------------------------------------------------
NOTE:

I uploaded the fusion360 file along with a step file for the model in this post.

Free feel to do any edits and sell the prints. Please do not sell the file.

--------------------------------------------------------------------------------------------------------

This print requires (4) BT3x25 BHCS self tapping screws along with the (3) screws that come with the Music Box.
 

To assemble:

First, install the 3 screws through the base into the music box. 

Second, put the middle piece on. You will need to angle it and move it over the arm of the music box. Once you get the edge of the middle section in the ledge of the base, tilt the middle section to now be on the base.

Third, attach the top and screw in the 4 screws via the holes in the bottom of the base.

Now it is assembled :D

To reduce clutter in the post, I have other varients of this model that you can find on my profile. 

I uploaded flat and raised versions on most of the images (Cat, Heart, Pretty Symbol, and Rose) that can be on the model along with a bird hueforge. 

There is also a Hueforge blank file uploaded with the Bird file. This is for if you want to make you own image to go on top.