December 17, 2023
Description
This is my version of a pringles tray!
Shove the tray into the can and pull out the tray with the pringles chips.
04.01.2025:
I uploaded a updated version with different lengths in 10mm steps from 250mm to 100mm. Choose the size that fits your can size and print it.
Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For best build plate adhesion, i use a strong hairspray. Apply a thin, even coat of it. I repeat the cleaning and reapplying of hairspray every 5-6 prints.
License:
BY-NC
SaVo3D
