Cool Cat Hueforge by RSDesigns

This is my very first Hueforge I've created. Image is AI generated by my requirements then converted via purchased HF professional software

 

Cool Cat Blue:

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Sky Blue Transmission Distance: 4
    PLA White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Sky Blue

Border Only Colours from here until the end.
    At layer #12 (1.04mm) swap to White for the rest.

 

Cool Cat B/W: 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Grey Transmission Distance: 1
    PLA White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Grey

Border Only Colours from here until the end.
    At layer #15 (1.28mm) swap to White for the rest.
 

Boost MeHi I'm Rob, not new to 3D printing but new to Bambu Labs awesome printers and community inc MakerWorld. I look forward to adding more models soon. Please I'd love it if you found my models useful or even just like it to give me a boost, I'd really appreciate it!  Many thanks ;0D