Demon Slayer Bookmarks

A set of 4 Demon Slayer Bookmarks featuring Shinobu, Nezuko, Inosuke and Tanjiro. Each bookmark is on its own build plate, 1 per plate.  

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

Patreon members also have access to exclusive designs available only on Patreon.

----------------------------

Instructions for each plate's layer swaps below: 

--------------------------------------------------------------------------------

Bookmark Plate 1: Shinobu 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x149.99mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 1.9mm and the Actual Depth is 1.8mm

This print uses 5 unique filaments
PLA BambuLab Basic Black 
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Purple
PLA BambuLab Basic Beige 
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Purple
At layer #13 (1.12mm) swap to Beige
At layer #17 (1.44mm) swap to Ivory White for the rest.

--------------------------------------------------------------------------------

Bookmark Plate 2: Nezuko
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm

This print uses 6 unique filaments
PLA BambuLab Basic Black 
PLA BambuLab Basic Dark Gray 
PLA BambuLab Matte Scarlet Red 
PLA BambuLab Matte Lemon Yellow
PLA BambuLab Basic Beige 
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Dark Gray
At layer #8 (0.72mm) swap to Scarlet Red
At layer #12 (1.04mm) swap to Lemon Yellow
At layer #16 (1.36mm) swap to Beige
At layer #19 (1.6mm) swap to Ivory White for the rest.

--------------------------------------------------------------------------------

Bookmark Plate 3: Inosuke
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x149.99mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm

This print uses 5 unique filaments
PLA BambuLab Basic Black 
PLA BambuLab Basic Dark Gray 
PLA BambuLab Basic Blue Cyan 
PLA BambuLab Matte Latte Brown 
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Dark Gray
At layer #9 (0.8mm) swap to Blue Cyan
At layer #14 (1.2mm) swap to Latte Brown
At layer #18 (1.52mm) swap to Ivory White for the rest.

--------------------------------------------------------------------------------

Bookmark Plate 4: Tanjiro 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm

This print uses 6 unique filaments
PLA BambuLab Basic Black 
PLA BambuLab Basic Dark Gray 
PLA BambuLab Matte Scarlet Red 
PLA BambuLab Basic Sunflower Yellow
PLA BambuLab Basic Beige 
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Dark Gray
At layer #9 (0.8mm) swap to Scarlet Red
At layer #12 (1.04mm) swap to Sunflower Yellow
At layer #15 (1.28mm) swap to Beige
At layer #19 (1.6mm) swap to Ivory White for the rest.