PLA + Plastic Wrap GREENHOUSE for Starting Trays

PLA + Plastic Wrap Greenhouses that sit on top of your Gridfinity Seed Starting Drip Trays

This requires and matches the Drip Trays from the parent Model:

https://makerworld.com/en/models/965052

 

Create a safe & humid environment for your seedling to start their growth! A Greenhouse lets the seeds grow towards the light while keeping humid conditions to maximize success 🌱🌞💦

 

Available Sizes - Ask in the comments if you need something added:

• 105mm tall: 2x3 | 2x4 | 2x5 | 3x3 | 3x4 | 3x5 | 4x4 | 4x5 | 5x5
• 65mm tall: 2x3 | 2x4 | 3x3 | 4x4
• 105mm tall with 2mm inserts: 4x4

HAPPY DIY 🌿

 

How it works:

2 Parts: Riser + Top

 

The Riser sits on the matching Drip Tray

You then need to cut a piece of Plastic wrap, or whatever piece of flexible & transparent plastic (from a Ziploc bag for example) and wrap it around the Riser.

1. Place a oversized piece of plastic on top of the Riser
2. Try to wrap it on the bottom back inside so when placed on the Drip Tray, it locks in place
3. (optional) You can use some tape to keep the plastic from moving
4. Place the Top on the Riser to lock in the plastic
5. Place the Greenhouse on the Drip Tray and you should be good to go!

 

 

Ask for any sizes to be added! Always happy to update this model!

Stay tuned!

 

Boost MeThank you so much for your support! I hope you enjoy this Greenhouse 🌿🌵🌱
Happy printing 🤩🔥