Gengar in the Cemetery ( Hueforge )

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Jessie Premium Purple Ice Transmission Distance: 18
    PLA BambuLab Matte Sakura Pink Transmission Distance: 3
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Purple Ice
    At layer #17 (1.44mm) swap to Sakura Pink
    At layer #23 (1.92mm) swap to Jade White for the rest.